If you want to improve your home network then you should install the Linksys Velop system. It is a mesh WiFi system consisting of a primary node and other nodes. On the Linksys Velop system there are some lights, which tell the users about the functions of Linksys Velop. But, nowadays, users face the Linksys Velop red light, it does not sound good on the system, and it indicates the issues related to mesh WiFi. If you also face a red light on Velop then you need to fix it.
Fixing the red light is not rocket science. You can fix it yourself with the assistance of good guidance. In this post, we will give you some suitable techniques that will work. So, let’s start! First, we will tell you about a few things that you need to make sure of before going to fix the Linksys Velop red light issue.
- Give the Proper power supply.
- Check all wires and cables carefully.
- Ensure that your hardware is working in good condition
- Your device firmware should be running on the latest version.
Thus, these are the things that you need to ensure so that you can easily eliminate the issue.
Fix Linksys Velop Red Light
Here, in this section, we tell you about the frequently used solutions for the Velop red light. We recommend you take your time and fruitfully perform the solution. If you do that we are sure that at the end of the article your Linksys Velop red light will go off.
Take the Nodes Closer
Excessive distance between the Linksys Velop nodes could be the reason why your mesh WiFi system blinks red light. You need to close your Velop nodes and place them at a suitable place where the red light is turned into blue. If this hack isn’t working for you then don’t be sad, after all, we have another hack for you that are elaborated further.
Contact Your ISP
There is a possibility that your internet service provider faces some service problems. Maybe your ISP is doing some maintenance on their internet network, or your area is affected by the service outage. Thus, all these things also could be reasons.
So, the best way to tackle this issue, contact the internet service provider and confirm the above-mentioned situation. If your ISP said about any issue then you don’t need to worry, just tell them to fix the issue fast.
Check the Cable Connection
If you are still stuck in the same situation then check your cable connections because there is a possibility that your Ethernet cable is damaged from somewhere or maybe Ethernet is not inserted in the device’s Ethernet ports.
So, we recommend you cross-check the cable connections. On the other hand, if you found any damage on the Ethernet cable, then go to the market and get a new Ethernet cable and fix the issue. If you are a lazy bug who doesn’t want to go out, then consider choosing a wireless connection.
Keep Firmware Update
Do you remember when you last updated your firmware? If not, then it means your device runs into the old version. The old version of firmware creates many issues and corrupts the internal files of the device. Thus, an old version of firmware is also the reason behind the red light on Linksys Velop
Therefore, first, we recommend you check the firmware version, by getting access to the Linksys Velop login page. If you found an old version, then update it as soon as you can. As firmware supports the device functions to work and also protects the device from bugs.
Now, you should check your device to make sure the red light will go off or not. If the red is still blinking on your Velop system then you need to perform the restart process.
Restart Your Linksys
Due to the occurrence of technical glitches, the device not working properly and illustrates the red light. So, we suggest you reboot your device to remove the temporary hiccups from the Linksys Velop.
Now, you are aware of the solutions to fix the red light on Linksys Velop, by following the aforementioned techniques the red light will go off, and you will be able to enjoy the uninterrupted service of your device.