Doing Wavlink extender login is a very crucial step if you want to perform Wavlink WiFi extender setup or update its firmware. But, 60 percent of users don’t know the actual step to perform the Wavlink login process and rest 40 percent don’t get success.
In this article, we have shed light on the process through which you can log in to your Wavlink WiFi extender and also the fixes to troubleshoot login-related issues related to Wavlink extender. Hence, stick to this 5-minute read!
Wavlink WiFi Extender Login Steps
Here are the step-by-step instructions following which performing Wavlink WiFi extender login will be a walk in the park for you.
Step 1: First things first, you need to power up your Wavlink WiFi extender.
Step 2: Then, you need to connect the Wavlink extender to your host router using either an Ethernet or a wireless source.
Step 3: After connecting your devices in a successful manner, you have to open a computer or laptop.
Step 4: Are you done opening your device? If so, then hover the mouse cursor over the web browser’s address bar and enter wifi.wavlink.com. If wifi.wavlink.com doesn’t work for you, use 192.168.10.1 instead.
Step 5: Press Enter and the Wavlink extender login window will display.
Step 6: Reaching on the login window of your Wavlink WiFi extender, input the admin details of your Wavlink device and click on the Login button.
The dashboard of your Wavlink WiFi extender will display. It indicates that the Wavlink login process is successful. Over here, you can follow the on-screen instructions and know how to configure your Wavlink extender, update its firmware, and more.
Unable to do Wavlink Login?
If you are unable to do Wavlink login, then bear in mind, there is nothing to worry about. We are right behind your back. In the upcoming section, we are going to provide you some of the best fixes following which troubleshooting Wavlink extender login issues will be as easy as counting 123 for you. Continue reading!
Fix 1: Make sure that your Wavlink extender is powered on in a proper way. You need to verify the power supply. Chances are your Wavlink extender is not operating on a steady power. So, consider this as first and important fix towards troubleshooting Wavlink login issues. Apart from this, ensure that your Wavlink device is not plugged into a loose or damage wall socket.
Moreover, if you have a problem of power outage in your area, then you must install a UPS. And, ensure to put your Wavlink extender on inverter. The reason being, if electricity is gone all of sudden, you still have the extender operational.
Fix 2: The second fix that you can apply to troubleshoot Wavlink login issues is to check the connection made by you between your extender and your host router., Keep in mind to create a finger-tight connection using a working cable between them. And, if you want to connect them wirelessly, then ensure to place your Wavlink device in a same room as of your router.
Fix 3: If you are still going mad because of the same issue, then make sure that you have fast internet connection and you are accessing the correct SSID (WiFi network name) on your device to reach the Wavlink login page for Wavlink extender setup and firmware update.
Fix 4: Clear the browsing history and also you need to shut down and unpin all the tabs from your internet browser during the Wavlink login process.
Fix 5: Private window is not recommended for you. Also, you are not supposed to enter wifi.wavlink.com or 192.168.10.1 in the search bar. Cross-check the entrée and ensure that there aren’t any typing errors in the default web address or the IP address of your Wavlink WiFi extender.
Fix 6: Last, but not least, be certain to have the correct Wavlink extender admin details with you. The correct Wavlink extender’s login password will surely going to give you Wavlink login success.
Summing Up
Here ends our write-up on Wavlink extender login and troubleshooting. Hopefully, after going through this piece of writing, you rack up Wavlink login success.