Home » Why do we use Proportional Needle Valves?

Why do we use Proportional Needle Valves?

by Silvia Watson
Proportional Needle Valves

A proportional needle valve is used when you have Aa large range of flow rates and pressures. They can control the flow rate of liquids, gases, or slurries. They are unsuitable for liquids or viscous slurries or contain large particles. Proportional flow control is used in applications where the flow rate is controlled by a proportional relationship to the valve position. It means you can open a valve and set it to run at a certain rate, then close it and set it to close at an equal rate. You can also do this with two valves: one valve can open or close while the other keeps running at the same rate.

Uses and Operations Of These Valves

The proportional flow control valve is a type of safety valve. They’re typically used to prevent overpressure in a system. It can happen when, for example, you have a pipe that runs through a hill and needs to be bigger than the diameter of the pipe itself. The proportional needle valve will open wider if the pressure in the system rises above a certain level. This way, it won’t burst open unless there is an extreme amount of pressure present—and if it does burst open, it will do so in a controlled manner that doesn’t cause damage or injury to anyone nearby.

How do proportional needle valves work?

A proportional needle valve is a type of fluid flow control where the flow rate is controlled by the size of the orifice rather than by how much pressure is applied to it. It means that the flow rate can be adjusted simply by adjusting the size of the orifice. The basic principle behind this type of valve is that as you increase the size of an opening, you increase the amount of fluid flowing through it. Proportional flow control valve pneumatic allows for finer adjustments in flow rate than traditional valves, which rely on controlling pressure instead of volume.

They’re great for controlling how much water comes out at any given time, but they can also be used for other things! For example, if you have an automatic sprinkler system or irrigation system installed in your yard, then a proportional needle valve would allow you to set the amount of water that will spray from each nozzle whenever necessary. It could save you money on your water bill by ensuring that only enough water comes out as needed so that plants don’t die from low moisture levels (or too much).

Perks To Know About These Valves

A proportional needle valve is often used in industrial processes, such as boilers, cooling towers, and manufacturing equipment. They offer many benefits over standard ball valves:

They are more reliable than traditional ball valves because they have no moving parts. The proportional gas flow control valve is less expensive than traditional ball valves because they don’t require springs or nylon sleeves for sealing purposes (which means less material needs to be used). They’re easier to install than traditional ball valves because there’s no need for special fittings or tubing.

Final Words

A proportional needle valve is a ball valve that helps control water flow. If you think about it, this makes sense—if you want to spray water or make a cup of tea, you don’t want to let all of it out at once. You want to be able to control how much comes out at any given time. That’s where the electronic pneumatic proportional flow control valve come in.

You may also like